Circuit Project Electronic

Input needs only several mWatts (e.g. BF900) -> 300 mWatts OUT. This schematic is a often used buffer. It’s easy to build, clean and cheap. When you want even more power, you can replace the 2N2219a by a 2N4427 or 2N3553. You can lower the output by adding a little resistor (10..47 Ohm 1/2W) in [...]

A few designs for remote control switches, using VG40T and VG40R remote control pair, are shown here. The miniature transmitter module shown in Fig. 1, which just measures 34 mm x 29 mm x 10 mm, can be used to operate all remote control receiver-cum-switch combinations described in this project. A compact 9-volt PP3 battery [...]

A Phase Locked Loop (PLL) consists of a Voltage Controlled Oscillator (VCO), the output frequency of which is monitored and controlled. An error voltage steers the VCO and brings it back onto the correct frequency. The error voltage is generated by a Phase Sensitive Detector (PSD) which compares the VCO frequency with a reference frequency.
Related [...]