Circuit Project Electronic

This includes a 220uF capacitor and two diodes to slow down the switch-on to reduce the output thump as the output capacitor charges through the speaker. This is not essential, depending on speaker sensitivity, with my own speakers there is just an unobtrusive low frequency sound at switch-on. With other applications such as a bi-amp [...]

The amplifier consists of two completely separate monaural amplifiers each channel has its own power supply, resulting in zero inter-channel cross talk, a common phenomenon in amplifiers sharing the same power supply. In order to obtain the full output power each supply transformer should be rated at 40VAC - 0 - 40VAC at 640VA. View [...]

mosfet amplifiers there is no clear distinction between class-B and class-AB. For a bipolar output stage it is common to call a design class-B if the quiescent current, Iq, is adjusted for minimum crossover distortion, and class-AB if the current is increased well above this optimum level so that operation remains in class-A for small [...]