Power Supplies circuits
Advertisements
This regulated power supply can be adjusted from 3 to 25 volts and is current limited to 2 amps as shown, but may be increased to 3 amps or more by selecting a smaller current sense resistor (0.3 ohm). The 2N3055 and 2N3053 transistors should be mounted on suitable heat sinks and the current sense resistor should be rated at 3 watts or more. Voltage regulation is controlled by 1/2 of a 1558 or 1458 op-amp.
Read More Source:
http://ourworld.compuserve.com/homepages/Bill_Bowden/page4.htm
Copyright 2008 www.elecfree.com/electronic/

