Low Power LED Voltmeter by LM3914

Advertisements

Introduction

This is a low power voltmeter circuit that can be used with alternative energy systems that run on 12 and 24 volt batteries. The voltmeter is an expanded scale type that indicates small voltage steps over the 10 to 16 volt range for 12 volt batteries and over the 22 to 32 volt range for 24 volt batteries. Power consumption can be as low as 14mw when operated from 12V and 160mw when operated from 24V. It is possible to set the meter to read equal steps across a variety of upper and lower voltages. The meter saves power by operating in a low duty-cycle blinking mode where the LED indicators are only on and consuming power briefly during a repeating 2 second cycle. The circuit may be switched to a high power mode where the active LED stays on at all times.

Different colored LEDs may be used for the voltage level indicators, this allows the battery state to be read in the dark. With the new blue LEDs, it is possible to have a nice looking rainbow of colors using two each of red, amber, yellow, green, and blue LEDs. The circuit will also work with inexpensive and common red LEDs. If the circuit is to be used in sunlight, ultra-bright LEDs should be used, although even those may be hard to read without some kind of sun shield.

Typical uses include the monitoring of portable battery operated systems and indoor wall mounted home power system charge indicators. The cost of the parts for the circuit is around $25.00 (US) and the parts are commonly available, except for the optional blue LEDs. If blue LEDS are used, expect to pay a premium for them, they cost several dollars each, compared to around 15 cents for the other colors. The blue LEDs do look nice in any case.
Related Links
More circuit about Meter
More circuit about IC LM3914
More circuit about IC 556
Circuit basic dot-bar Display for LM3914
Digital Measurements Temperature by LM335
Optical Power Meter by IC 741
Digital Step-Km Counter with IC 4026,4024
Test Transistor in Circuit by IC 4011
High impedance DC Voltmeter by IC CA3130
Light Sensitive Switch with LDR + 2N2926
Peak Level Indicator by IC LM723
AC Line testing circuit.
Car Temperature Gauge by IC CA3162 + CA3161

Read more Source Link : http://www.solorb.com/elect/solarcirc/vom/index.html

This entry was posted on Monday, July 23rd, 2007 at 5:42 pm and is filed under LED Flasher, Lighting, meter. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.