Archive for the Category


Low Noise Variable Output 1.25V to 12Vdc

Wednesday, January 27th, 2010

Advertisements


This circuit is DC converter low voltage , 12V from be 1.25V to 10Vdc by can give current topmost get about 1.5A. You should use IC number LM317K because have electric many power more the number LM317T. By should hold heat sink. That have large-sized with. The R4 use for fine decorate voltage [...]

2N3055 Variable power supply

Thursday, December 24th, 2009

Advertisements


This simple variable power supply circuit has a low production cost and delivers an output voltage between 1,5 V and 15 V with a 500 mA maximum current. Its stabilization is better than 2% if the current consumption do not exceed 350 mA. The variation of the power supply voltage can be made with a [...]

General purpose power supply with LM723 and TIP31

Tuesday, December 22nd, 2009

Advertisements


This general purpose power supply can e used for supply output voltages from 1 to 35V. The line transformer should be selected to give about 1.4 times the desired output voltage from the positive side of filter capacitor C1 to ground. Potentiometer R2 sets the output voltage to the desired value by adjusting the reference [...]