IC 555 Circuit page 01 :
Headlight Flasher
IC 555 Timer circuit
Home
It will allow your car headlights to flash on and off at the
same time or it will cause them to flash alternately.
The circuit is based on the 555 timer. It is used in the astable mode.
The 555 timer output will go high for an adjustable period of time and then turn off.
It will then repeat the procedure. The time is adjusted by R1.
To hook up the circuit to your car you must locate the positive wire from the fuse box to the headlights.
Cut the wire and insert the relay contact and bypass switch.
The bypass switch will allow you to bypass the relay contact for normal headlight operation.
In the alternating headlight configuration you must
cut the positive wire to each headlight and wire in the relay contact.
From :: http://home.maine.rr.com/randylinscott/sep98.htm